Πρότυπα

Technical Regulations in the field of NDT and related subjects

CEN Standards
(European Committee for Standardization)

EN 12543-1:1999 (WI=00138030)
Non-destructive testing – Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing – Part 1: Scanning method
Published
EN 12543-2:2008 (WI=00138126)
Non-destructive testing – Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing – Part 2: Pinhole camera radiographic method
Published
EN 12543-3:1999 (WI=00138061)
Non-destructive testing – Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing – Part 3: Slit camera radiographic method
Published
EN 12543-4:1999 (WI=00138062)
Non-destructive testing – Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing – Part 4: Edge method
Published
EN 12543-5:1999 (WI=00138063)
Non-destructive testing – Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing – Part 5: Measurement of the effective focal spot size of mini and micro focus X-ray tubes
Published
EN 12544-1:1999 (WI=00138065)
Non-destructive testing – Measurement and evaluation of the X-ray tube voltage – Part 1: Voltage divider method
Published
EN 12544-2:2000 (WI=00138066)
Non-destructive testing – Measurement and evaluation of the X-ray tube voltage – Part 2: Constancy check by the thick filter method
Published
EN 12544-3:1999 (WI=00138040)
Non-destructive testing – Measurement and evaluation of the X-ray tube voltage – Part 3: Spectrometric method
Published
EN 12668-1:2010 (WI=00138137)
Non-destructive testing – Characterization and verification of ultrasonic examination equipment – Part 1: Instruments
EN 12668-2:2010 (WI=00138138)
Non-destructive testing – Characterization and verification of ultrasonic examination equipment – Part 2: Probes
EN 12668-3:2013 (WI=00138189)
Non-destructive testing – Characterization and verification of ultrasonic examination equipment – Part 3: Combined equipment
Published
EN 12679:1999 (WI=00138039)
Non-destructive testing – Determination of the size of industrial radiographic sources – Radiographic method
Published
EN 13018:2016 (WI=00138209)
Non-destructive testing – Visual testing – General principles
Published
EN 13068-1:1999 (WI=00138050)
Non-destructive testing – Radioscopic testing – Part 1: Quantitative measurement of imaging properties
Published
EN 13068-2:1999 (WI=00138073)
Non-destructive testing – Radioscopic testing – Part 2: Check of long term stability of imaging devices
Published
EN 13068-3:2001 (WI=00138074)
Non-destructive testing – Radioscopic testing – Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays
Published
EN 13184:2001 (WI=00138033)
Non-destructive testing – Leak testing – Pressure change method
Published
EN 13184:2001/A1:2003 (WI=00138109)
Non-destructive testing – Leak testing – Pressure change method
Published
EN 13185:2001 (WI=00138044)
Non-destructive testing – Leak testing – Tracer gas method
Published
EN 13185:2001/A1:2003 (WI=00138110)
Non-destructive testing – Leak testing – Tracer gas method
Published
EN 13192:2001 (WI=00138043)
Non destructive testing – Leak testing – Calibration of reference leaks for gases
Published
EN 13192:2001/AC:2003 (WI=00138C02)
Non destructive testing – Leak testing – Calibration of reference leaks for gases
Published
EN 1330-10:2003 (WI=00138069)
Non-destructive testing – Terminology – Part 10: Terms used in visual testing
Published
EN 1330-11:2007 (WI=00138078)
Non-destructive testing – Terminology – Terms used in X-ray diffraction from polycrystalline and amorphous materials
Published
EN 1330-1:2014 (WI=00138204)
Non destructive testing – Terminology – Part 1: List of general terms
Published
EN 1330-2:1998 (WI=00138048)
Non destructive testing – Terminology – Part 2: Terms common to the non-destructive testing methods
EN 1330-3:1997 (WI=00138002)
Non-destructive testing – Terminology – Part 3: Terms used in industrial radiographic testing
EN 1330-4:2010 (WI=00138127)
Non-destructive testing – Terminology – Part 4: Terms used in ultrasonic testing
Published
EN 1330-7:2005 (WI=00138027)
Non-destructive testing – Terminology – Part 7: Terms used in magnetic particle testing
Published
EN 1330-8:1998 (WI=00138026)
Non-destructive testing – Terminology – Part 8: Terms used in leak tightness testing
Published
EN 1330-9:2009 (WI=00138131)
Non-destructive testing – Terminology – Part 9: Terms used in acoustic emission testing
Published
EN 13477-1:2001 (WI=00138089)
Non-destructive testing – Acoustic emission – Equipment characterisation – Part 1: Equipment description
Published
EN 13477-2:2010 (WI=00138142)
Non-destructive testing – Acoustic emission – Equipment characterisation – Part 2: Verification of operating characteristic
EN 13554:2011 (WI=00138143)
Non-destructive testing – Acoustic emission testing – General principles
EN 13625:2001 (WI=00138055)
Non-destructive testing – Leak test – Guide to the selection of instrumentation for the measurement of gas leakage
Published
EN 13925-1:2003 (WI=00138079)
Non-destructive testing – X-ray diffraction from polycrystalline and amorphous material – Part 1: General principles
Published
EN 13925-2:2003 (WI=00138080)
Non-destructive testing – X-ray diffraction from polycrystalline and amorphous materials – Part 2: Procedures
Published
EN 13925-3:2005 (WI=00138081)
Non destructive testing – X ray diffraction from polycrystalline and amorphous materials – Part 3: Instruments
Published
EN 13927:2003 (WI=00138068)
Non-destructive testing – Visual testing – Equipment
Published
EN 14096-1:2003 (WI=00138084)
Non-destructive testing – Qualification of radiographic film digitisation systems – Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control
Published
EN 14096-2:2003 (WI=00138085)
Non-destructive testing – Qualification of radiographic film digitisation systems – Part 2: Minimum requirements
Published
EN 14127:2011 (WI=00138153)
Non-destructive testing – Ultrasonic thickness measurement
EN 14584:2013 (WI=00138159)
Non-destructive testing – Acoustic emission testing – Examination of metallic pressure equipment during proof testing – Planar location of AE sources
Published
EN 14784-1:2005 (WI=00138094)
Non-destructive testing – Industrial computed radiography with storage phosphor imaging plates – Part 1: Classification of systems
EN 14784-2:2005 (WI=00138095)
Non-destructive testing – Industrial computed radiography with storage phosphor imaging plates – Part 2: General principles for testing of metallic materials using X-rays and gamma rays
Published
EN 1518:1998 (WI=00138034)
Non-destructive testing – Leak testing – Characterization of mass spectrometer leak detectors
Published
EN 15305:2008 (WI=00138097)
Non-destructive Testing – Test Method for Residual Stress analysis by X-ray Diffraction
Published
EN 15305:2008/AC:2009 (WI=00138C04)
Non-destructive Testing – Test Method for Residual Stress analysis by X-ray Diffraction
Published
EN 15317:2013 (WI=00138191)
Non-destructive testing – Ultrasonic testing – Characterization and verification of ultrasonic thickness measuring equipment
Published
EN 15495:2007 (WI=00138120)
Non Destructive testing – Acoustic emission – Examination of metallic pressure equipment during proof testing – Zone location of AE sources
Published
EN 15856:2010 (WI=00138140)
Non-destructive testing – Acoustic emission – General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid
EN 15857:2010 (WI=00138141)
Non-destructive testing – Acoustic emission – Testing of fibre-reinforced polymers – Specific methodology and general evaluation criteria
EN 1593:1999 (WI=00138038)
Non-destructive testing – Leak testing – Bubble emission techniques
Published
EN 1593:1999/A1:2003 (WI=00138112)
Non-destructive testing – Leak testing – Bubble emission techniques
Published
EN 16016-1:2011 (WI=00138144)
Non destructive testing – Radiation methods – Computed tomography – Part 1: Terminology
Published
EN 16016-2:2011 (WI=00138145)
Non destructive testing – Radiation methods – Computed tomography – Part 2: Principle, equipment and samples
Published
EN 16016-3:2011 (WI=00138146)
Non destructive testing – Radiation methods – Computed Tomography – Part 3: Operation and interpretation
Published
EN 16016-4:2011 (WI=00138147)
Non destructive testing – Radiation methods – Computed tomography – Part 4: Qualification
Published
EN 16018:2011 (WI=00138148)
Non-destructive testing – Terminology – Terms used in ultrasonic testing with phased arrays
Published
EN 16392-2:2014 (WI=00138182)
Non-destructive testing – Characterisation and verification of ultrasonic phased array equipment – Part 2: Probes
Published
EN 16407-1:2014 (WI=00138156)
Non-destructive testing – Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays – Part 1: Tangential radiographic inspection
Published
EN 16407-2:2014 (WI=00138157)
Non-destructive testing – Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays – Part 2: Double wall radiographic inspection
Published
EN 1779:1999 (WI=00138024)
Non-destructive testing – Leak testing – Criteria for method and technique selection
Published
EN 1779:1999/A1:2003 (WI=00138113)
Non-destructive testing – Leak testing – Criteria for method and technique selection
Published
EN 25580:1992 (WI=00138015)
Non-destructive testing – Industrial radiographic illuminators – Minimum requirements (ISO 5580:1985)
Published
EN ISO 11699-1:2011 (WI=00138164)
Non-destructive testing – Industrial radiographic film – Part 1: Classification of film systems for industrial radiography (ISO 11699-1:2008)
Published
EN ISO 11699-2:2011 (WI=00138165)
Non-destructive testing – Industrial radiographic films – Part 2: Control of film processing by means of reference values (ISO 11699-2:1998)
Published
EN ISO 12706:2009 (WI=00138135)
Non-destructive testing – Penetrant testing – Vocabulary (ISO 12706:2009)
Published
EN ISO 12718:2008 (WI=00138122)
Non-destructive testing – Eddy current testing – Vocabulary (ISO 12718:2008)
Published
EN ISO 15548-1:2013 (WI=00138186)
Non-destructive testing – Equipment for eddy current examination – Part 1: Instrument characteristics and verification (ISO 15548-1:2013)
Published
EN ISO 15548-2:2013 (WI=00138187)
Non-destructive testing – Equipment for eddy current examination – Part 2: Probe characteristics and verification (ISO 15548-2:2013)
Published
EN ISO 15548-3:2008 (WI=00138130)
Non-destructive testing – Equipment for eddy current examination – Part 3: System characteristics and verification (ISO 15548-3:2008)
Published
EN ISO 15549:2010 (WI=00138155)
Non-destructive testing – Eddy current testing – General principles (ISO 15549:2008)
Published
EN ISO 16810:2014 (WI=00138200)
Non-destructive testing – Ultrasonic testing – General principles (ISO 16810:2012)
Published
EN ISO 16811:2014 (WI=00138199)
Non-destructive testing – Ultrasonic testing – Sensitivity and range setting (ISO 16811:2012)
Published
EN ISO 16823:2014 (WI=00138198)
Non-destructive testing – Ultrasonic testing – Transmission technique (ISO 16823:2012)
Published
EN ISO 16826:2014 (WI=00138196)
Non-destructive testing – Ultrasonic testing – Examination for discontinuities perpendicular to the surface (ISO 16826:2012)
Published
EN ISO 16827:2014 (WI=00138197)
Non-destructive testing – Ultrasonic testing – Characterization and sizing of discontinuities (ISO 16827:2012)
Published
EN ISO 16828:2014 (WI=00138201)
Non-destructive testing – Ultrasonic testing – Time-of-flight diffraction technique as a method for detection and sizing of discontinuities (ISO 16828:2012)
Published
EN ISO 16946:2015 (WI=00138177)
Non-destructive testing – Ultrasonic testing – Specification for step wedge calibration block (ISO 16946:2015)
Published
EN ISO 17405:2014 (WI=00138183)
Non-destructive testing – Ultrasonic testing – Technique of testing claddings produced by welding, rolling and explosion (ISO 17405:2014)
Published
EN ISO 18490:2015 (WI=00138190)
Non-destructive Testing – Evaluation of vision acuity of NDT personnel (ISO 18490:2015)
Published
EN ISO 18563-1:2015 (WI=00138184)
Non-destructive testing – Characterization and verification of ultrasonic phased array equipment – Part 1: Instruments (ISO 18563-1:2015)
Published
EN ISO 18563-3:2015 (WI=00138185)
Non-destructive testing – Characterization and verification of ultrasonic phased array equipment – Part 3: Combined systems (ISO 18563-3:2015)
Published
EN ISO 19232-1:2013 (WI=00138166)
Non-destructive testing – Image quality of radiographs – Part 1: Determination of the image quality value using wire-type image quality indicators (ISO 19232-1:2013)
Published
EN ISO 19232-2:2013 (WI=00138167)
Non-destructive testing – Image quality of radiographs – Part 2: Determination of the image quality value using step/hole-type image quality indicators (ISO 19232-2:2013)
Published
EN ISO 19232-3:2013 (WI=00138168)
Non-destructive testing – Image quality of radiographs – Part 3: Image quality classes (ISO 19232-3:2013)
Published
EN ISO 19232-4:2013 (WI=00138169)
Non-destructive testing – Image quality of radiographs – Part 4: Experimental evaluation of image quality values and image quality tables (ISO 19232-4:2013)
Published
EN ISO 19232-5:2013 (WI=00138170)
Non-destructive testing – Image quality of radiographs – Part 5: Determination of the image unsharpness value using duplex wire-type image quality indicators (ISO 19232-5:2013)
Published
EN ISO 2400:2012 (WI=00138174)
Non-destructive testing – Ultrasonic testing – Specification for calibration block No. 1 (ISO 2400:2012)
Published
EN ISO 3059:2012 (WI=00138160)
Non-destructive testing – Penetrant testing and magnetic particle testing – Viewing conditions (ISO 3059:2012)
Published
EN ISO 3452-1:2013 (WI=00138158)
Non-destructive testing – Penetrant testing – Part 1: General principles (ISO 3452-1:2013, Corrected version 2014-05-01)
Published
EN ISO 3452-2:2013 (WI=00138178)
Non-destructive testing – Penetrant testing – Part 2: Testing of penetrant materials (ISO 3452-2:2013)
Published
EN ISO 3452-3:2013 (WI=00138179)
Non-destructive testing – Penetrant testing – Part 3: Reference test blocks (ISO 3452-3:2013)
Published
EN ISO 3452-4:1998 (WI=00138032)
Non-destructive testing – Penetrant testing – Part 4: Equipment (ISO 3452-4:1998)
Published
EN ISO 3452-5:2008 (WI=00138124)
Non-destructive testing – Penetrant testing – Part 5: Penetrant testing at temperatures higher than 50 degrees C (ISO 3452-5:2008)
Published
EN ISO 3452-6:2008 (WI=00138125)
Non-destructive testing – Penetrant testing – Part 6: Penetrant testing at temperatures lower than 10 degrees C (ISO 3452-6:2008)
Published
EN ISO 5579:2013 (WI=00138162)
Non-destructive testing – Radiographic testing of metallic materials using film and X- or gamma rays – Basic rules (ISO 5579:2013)
Published
EN ISO 7963:2010 (WI=00138154)
Non-destructive testing – Ultrasonic testing – Specification for calibration block No. 2 (ISO 7963:2006)
Published
EN ISO 9712:2012 (WI=00138175)
Non-destructive testing – Qualification and certification of NDT personnel (ISO 9712:2012)
Published
EN ISO 9934-1:2015 (WI=00138171)
Non-destructive testing – Magnetic particle testing – Part 1: General principles (ISO 9934-1:2015)
Published
EN ISO 9934-2:2015 (WI=00138172)
Non-destructive testing – Magnetic particle testing – Part 2: Detection media (ISO 9934-2:2015)
Published
EN ISO 9934-3:2015 (WI=00138173)
Non-destructive testing – Magnetic particle testing – Part 3: Equipment (ISO 9934-3:2015)
Published
FprEN 16714-1 (WI=00138194)
Non-destructive testing – Thermographic testing – Part 1: General principles
Under Approval
FprEN 16714-2 (WI=00138210)
Non-destructive testing – Thermographic testing – Part 2: Equipment
Under Approval
FprEN 16714-3 (WI=00138211)
Non-destructive testing – Thermographic testing – Part 3: Terms and definitions
Under Approval
FprEN ISO 12707 (WI=00138188)
Non-destructive testing – Magnetic particle testing – Vocabulary (ISO/FDIS 12707:2015)
Approved
FprEN ISO 18081 (WI=00138176)
Non-destructive testing – Acoustic emission testing (AT) – Leak detection by means of acoustic emission (ISO/FDIS 18081:2016)
Under Approval
prEN 1330-9 (WI=00138220)
Non-destructive testing – Terminology – Part 9: Terms used in acoustic emission testing
Under Approval
prEN ISO 16371-2 (WI=00138221)
Non-destructive testing – Industrial computed radiography with storage phosphor imaging plates – Part 2: General principles for testing of metallic materials using X-rays and gamma rays (ISO/DIS 16371-2:2016)
Under Enquiry
prEN ISO 20339 (WI=00138218)
Non-destructive testing – Equipment for eddy current examination – Array probe characteristics and verification (ISO/DIS 20339:2015)
Under Approval
prEN ISO 20484 (WI=00138222)
Non-destructive testing – Leak testing – Vocabulary (ISO/DIS 20484:2015)
Under Approval
prEN ISO 20485 (WI=00138216)
Non-destructive testing – Leak testing – Tracer gas method
Under Approval
prEN ISO 5577 (WI=00138203)
Non-destructive testing – Ultrasonic testing – Vocabulary (ISO/DIS 5577:2015)
Under Approval

 


Dye Penetrant Inspection (DPI) – Liquid Penetrant Inspection (LPI)

ASTM International (ASTM)

  • ASTM E 165, Standard Practice for Liquid Penetrant Examination for General Industry
  • ASTM E 1417, Standard Practice for Liquid Penetrant Testing

American Society of Mechanical Engineers (ASME)

  • ASME Boiler and Pressure Vessel Code, Section V, Art. 6, Liquid Penetrant Examination
  • ASME Boiler and Pressure Vessel Code, Section V, Art. 24 Standard Test Method for Liquid Penetrant Examination SE-165(identical with ASTM E-165)

European Committee for Standardization (CEN)

  • EN 571-1, Non-destructive testing – Penetrant testing – Part 1: General principles
  • EN 1371-1, Founding – Liquid penetrant inspection – Part 1: Sand, gravity die and low pressure die castings
  • EN 1371-2, Founding – Liquid penetrant inspection – Part 2: Investment castings
  • EN 2002-16, Aerospace series – Metallic materials; test methods – Part 16: Non-destructive testing, penetrant testing
  • EN 10228-2, Non-destructive testing of steel forgings – Part 2: Penetrant testing
  • EN 10246-11, Non-destructive testing of steel tubes – Part 11: Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections